As many say, technological evolution is here to stay. Nowadays, every aspect of life is revolutionized, and thanks to technological advancement, life is becoming easier by the day.
For example, a couple of years ago, car theft was the new normal. Anyone who knows how to cross some wires and use a screwdriver could quickly get away with someone else’s car. Fortunately, this has become nearly impossible with modern electronic car keys, especially since most cars can only start with the correct computer chip.
Technology has advanced to the point that many vehicles nowadays don’t require a key insertion to start. With an electronic fob, you can easily push a button to start your car. This has made car theft even more challenging. That said, most car owners don’t worry about leaving their precious vehicles on the street, given that this advanced technology is present in the vehicle.
From the car owner’s perspective, there may be some times when one will experience challenges when starting the car without the correct chip, hence the need to program a car key. However, programming a car key differs based on the vehicle type. Often, it’s best to seek the help of a professional who offers car key replacement services if programming a car key poses a challenge.
Nevertheless, if you’re looking forward to programming your car key on your own, the following is a general car programming guide that may work on most vehicles.
Programming A Single Key
Like when having a Toyota car key replacement, you might be allowed to program a single key whether or not you have a working key. Nevertheless, it’s vital to mention that you must provide the key cut that fits into the ignition as proof of ownership to the locksmith.
When programming a single key, the process is simpler than programming a second or third key. Here are the things you need to do:
- Insert the blank key into the ignition. Turn it and avoid starting the engine. Make sure to only turn on the electronics.
- Allow the key to sit in the ignition for about ten minutes, then turn it off.
- Insert the key back into the ignition, allow it to stay for another ten minutes, and then turn it off.
- Repeat the process.
- Turn the key on to allow it to program.
- Start the vehicle to determine if the key is working.
If these steps don’t work for your car key, consider hiring a car locksmith to handle the project.
Programming A Second Or Third Key
The most straightforward car key programming is when making a second key. Since you already have the original key, many manufacturers will assume you’re the vehicle’s owner. Nevertheless, it’s important to note that some manufacturers would require you to have two keys for this method to succeed; hence it’ll only be helpful when making a third key.
Here are the steps that you need to follow:
- First, you’ll need to sit in the driver’s seat. At this point, place your new, blank key where you can easily access it. If you already have two working keys, set the second along with the blank one since you’ll need to move as fast as possible.
- Once ready, insert the functioning key into the ignition and turn it. Avoid starting the engine when turning the key since you only need to turn on the electronics. After the power has been activated, turn the key to the off position and withdraw it from the ignition.
- At this point, you’ll need to act quickly, especially since you only have about five seconds to remove the first key from the ignition and insert the second one. The second key might be the second working or the new, blank key based on your vehicle type. Once you’ve removed the first key from the ignition and inserted the second one, repeat the process discussed earlier.
- If using three keys, repeat the procedure when swapping the third key. If you only have two keys, leave the second one in the ignition. Once you leave your blank key on the ignition, your car should indicate that it’s in security mode, and the security lights should turn on.
- The security lights should stay on for about three seconds while the key is being programmed. Depending on your car type, you might need to press some buttons to confirm if the key is being programmed. Once the security lights go off, withdraw the key from the ignition and insert it once more to confirm if it’s working.
Please note that these are just some general guidelines you can follow in programming a second or third key. If all else fails, contact a professional who can accurately work on your car key.
Conclusion
Depending on your vehicle type, programming a car key can be as easy as replacing it. If you can successfully do the process yourself, this will ultimately help you save money, especially since this project doesn’t come cheap.
However, if you have doubts about doing it right, allow the professionals to do it for you. You don’t want to make a mess and make the situation worst for you and your vehicle.